Mini-split units are excellent for cooling smaller spaces such as bedrooms, home offices, or family rooms. Because they don’t require any ductwork, they can be installed where traditional air conditioning systems don’t fit. Plus, they offer more control over the temperature of individual zones, allowing you to customize the system to your needs.
But exactly how many rooms can a mini-split cool? The system’s effectiveness will depend on a few factors, including mini-split capacity, room size, number of windows, and climate conditions.
Fortunately, mini-splits are available in various sizes and capacities. So if you’re looking to install a new AC unit in your home, you should be able to find one that matches your home’s heating needs. Read on for more about mini-splits!
What is a mini-split system?
A mini-split is an HVAC system consisting of an outdoor unit and multiple indoor ones. The outdoor unit is referred to as the condenser or the compressor, while the indoor ones are known as air handlers.
Usually, mini-splits don’t require ductwork. Instead, each air handler cools a specific room. This makes mini-splits the ideal system for zoned heating or cooling. But how can one mini-split cool multiple rooms? Simple. There are multiple air handlers – one for each room.
A mini-split uses multiple air handlers to remove the warm air from different rooms, directing it to the outdoor unit or the compressor through a refrigerant line. The compressor, in turn, releases the heat from your indoor air to the outdoor environment.
When heating, the compressor draws heat from the outdoor environment and transfers it to the air handlers. The air handlers will heat a specific room or zone based on that area’s heating requirements. In other words, you can customize different temperatures for different zones.
Now that we’ve covered what a mini-split is and how it works, let’s steer back to the main question! How many rooms can a mini-split cool?
The total number of rooms a mini-split can cool
A mini-split system can cool several rooms at once. Usually, you can connect one condenser (outdoor unit) to up to eight air handlers inside the house, which means that the system can cool up to eight mini-split zones. Each air handler is fitted with a thermostat, allowing you to set the desired temperature for that specific room.
However, there are several factors that determine how efficient a mini-split system will be and the number of rooms it can cool. The main factors include:
- The system’s cooling capacity
The cooling capacity of a mini-split system dictates how many rooms it can cool. That’s because the energy needed to cool or heat each room will vary from one area to another.
Also, since you’re using one condenser, it means that its output will be shared among the indoor units. Therefore, the larger the capacity, the more rooms it can cool efficiently. All you need to know is the unit’s BTUs (British Thermal Units) and the total square footage of each of the rooms you need to cool.
A British Thermal Unit (BTU) is a unit of measurement that indicates the heating or cooling capacity of a unit. The higher the number, the more powerful the system. Depending on a room’s size, any given space will require a certain number of BTUs to heat or cool it.
For instance, if a condenser is rated 24,000 BTUs, and each air handler is rated 6000 BTUs, it means that the system can cool or heat up to four zones efficiently.
- Room size and number of windows
The room’s size and the number of windows present in a given space will also affect the number of rooms a mini-split can cool. That’s because larger rooms, as well as those with more windows, require higher-capacity units. As a result, you’ll need to invest in several mini-splits if your home has many bigger rooms or ones with many windows.
For example, a heat pump with a capacity of 24,000 BTUs and a home with rooms that each require around 8,000 BTUs to cool. In this case, the system can cool around three rooms effectively, as each room takes a part of the total cooling power of the heat pump.
- Climate conditions
The climate of a region also matters. Areas that experience extreme temperatures will require higher-capacity systems than those living in milder regions.
In other words, if the temperatures in an area are high, each room will require more cooling capacity. And since the outdoor unit is the sole source of cooling power, it means that the rooms will share that capacity.
For example, if your mini-split cooling capacity is 36,000 BTUs, and each room requires 9,000 BTUs, you can cool up to four rooms. The most important thing is to understand the capacity needed to cool a single room, then use the figure to determine how many rooms your mini-split can cool.
Can a mini-split cool a whole house?
Absolutely! But, this will depend on the size of the house in terms of its square footage and the number of rooms.
If the house has small to medium-sized rooms, you can effectively cool them all with a single mini-split. But if the rooms are bigger and require more cooling power, you’ll need a system that’s more robust or more than one.
Seeking the services of a qualified HVAC technician is highly recommended. A professional will quickly assess your home, the number of rooms, and the BTUs needed to cool the entire house. They can advise you on the best system to install, whether a single or dual condenser or even several units.
Bottom line
How many rooms can a mini-split cool? The answer is highly dependent on the specific house and unit type. Different rooms require different cooling capacities based on size, ventilation, and insulation used.
The most important thing is to understand the cooling requirements for each room, then use that to determine the mini-split capacity required for the entire home. From there, you can also decide how many handlers you’ll need. Remember, a single room can have two or more cooling zones, requiring several air handlers.
If you have more questions about what a mini-split system can do for your home, contact the pros at Anderson Air today.